Another impressive CBRS capable hotspot we have tested here at Celona is the Inseego M2000. This palm sized device weighs in only 7.4oz (210g) with an impressive feature list.
Device Information
5G Sub6/mmWave
orSub6 Only4G LTE CAT 22
Wi-Fi 6: 802.11 b/g/n/ax (2.4GHz/5.0GHz)
Supports up to 30 Wi-Fi Enabled Devices
2.4” (60.96mm) Color Touchscreen Display
Built on Qualcomm® Snapdragon™ SDX55
24-hours battery life
Configuration
Remove the battery back and install a Celona SIM.
Power up the gateway and you should see a connection.
If the connection does not activate access the web UI of the device and update the APN to
default.APN settings are access via
Settings>Advanced>Cellular
In order to connect to Celona Outdoor AP IPv6 must be disabled by accessing the web UI of the device.
Go to
Settings>Advanced Settings>LANDisable
IPv6andsave.
Double check to make sure that the following settings are also in place:
LPM Mode: 00Sim delay during power on: 02LTE band priority: PROVISIONED5G SA band: ON5G NSA band – n48, n78: ON
To see Inseego M2000 in action on a Celona network, enabled with critical apps that you care the most about, feel free to request a custom demo here.