Skip to main content
Inseego MiFi M2000 on Celona

Basic connectivity on private LTE for the Wi-Fi hotspot and USB adapter

Team Celona avatar
Written by Team Celona
Updated over a week ago

Another impressive CBRS capable hotspot we have tested here at Celona is the Inseego M2000. This palm sized device weighs in only 7.4oz (210g) with an impressive feature list.

Device Information

  • 5G Sub6/mmWave or Sub6 Only

  • 4G LTE CAT 22

  • Wi-Fi 6: 802.11 b/g/n/ax (2.4GHz/5.0GHz)

  • Supports up to 30 Wi-Fi Enabled Devices

  • 2.4” (60.96mm) Color Touchscreen Display

  • Built on Qualcomm® Snapdragon™ SDX55

  • 24-hours battery life

Configuration

  • Remove the battery back and install a Celona SIM.

  • Power up the gateway and you should see a connection.

  • If the connection does not activate access the web UI of the device and update the APN to default.

    • APN settings are access via Settings > Advanced > Cellular

  • In order to connect to Celona Outdoor AP IPv6 must be disabled by accessing the web UI of the device.

    • Go to Settings > Advanced Settings > LAN

    • Disable IPv6 and save.

  • Double check to make sure that the following settings are also in place:

    • LPM Mode: 00

    • Sim delay during power on: 02

    • LTE band priority: PROVISIONED

    • 5G SA band: ON

    • 5G NSA band – n48, n78: ON


To see Inseego M2000 in action on a Celona network, enabled with critical apps that you care the most about, feel free to request a custom demo here.

Did this answer your question?