Single Node Cluster
Base single node cluster IP requirement | Qty. | Description |
AP to Edge control plane on native VLAN (S1-MME, N2-AMF) | 1 | One IP address for each Edge node |
AP to Edge data plane on native VLAN (S1-U, N3) | 1 | One IP address for each Edge node |
For every External Domain | Qty. | Description |
Edge to Enterprise LAN data plane on tagged VLANs (N6/UPF) |
0 1 | If Layer 2 External Domain, no N6 IP interface If Layer 3 External Domain; one IP address for each Edge node |
3-Node Cluster
Base 3-node cluster IP requirements | Qty. | Description |
AP to Edge control plane on native VLAN (S1-MME, N2-AMF) | 3 1 | One IP address for each Edge node One IP address for Edge Cluster |
AP to Edge data plane on native VLAN (S1-U, N3) | 3 | One IP address for each Edge node |
For every External Domain | Qty. | Description |
Edge to Enterprise LAN data plane on tagged VLANs (N6/UPF) | 0
3
1 | If Layer 2 External Domain, no N6 IP interface If Layer 3 External Domain; one IP address for each Edge node If Layer 3 External Domain; one VRRP IP address for Edge Cluster |
Note
All IP addresses are allocated by default using DHCP
Refer to the Edge Cluster creation workflow to allocate static IP addresses
Static control-plane addressing, including per-node subnet mask, gateway, DNS, and NTP servers, is set in the Local Edge Manager UI; the cluster VRRP IP address and VRRP ID are set in the Orchestrator UI during Edge Cluster creation
Static data-plane (S1-U, N3) addressing is set in the Orchestrator UI on the Edge Cluster details page
Static N6 addressing, including the VRRP IP address and VRRP ID for Layer 3 External Domains, is set in the Orchestrator UI during External IP Domain creation
If using DHCP, it is highly recommended that IP addresses are reserved for all interfaces
Interface MAC addresses can be found in the Orchestrator for reference
Use the Celona Edge Cluster IP Network planning sheet to assist with IP design: