Skip to main content
All CollectionsGetting Started with Celona 5G LAN
Edge IP address requirements - Post 2406
Edge IP address requirements - Post 2406
P
Written by Puneet Shetty
Updated this week

Single Node Cluster

Base single node cluster IP requirement

Qty.

Description

AP to Edge control plane on native VLAN (S1-MME, N2-AMF)

1

One IP address for each Edge node

AP to Edge data plane on native VLAN (S1-U, N3)

1

One IP address for each Edge node

For every External Domain

Qty.

Description

Edge to Enterprise LAN data plane on tagged VLANs (N6/UPF)

0


1

If Layer 2 External Domain, no N6 IP interface


If Layer 3 External Domain; one IP address for each Edge node

3-Node Cluster

Base 3-node cluster IP requirements

Qty.

Description

AP to Edge control plane on native VLAN (S1-MME, N2-AMF)

3


1

One IP address for each Edge node


One IP address for Edge Cluster

AP to Edge data plane on native VLAN (S1-U, N3)

3

One IP address for each Edge node

For every External Domain

Qty.

Description

Edge to Enterprise LAN data plane on tagged VLANs (N6/UPF)

0


3


1

If Layer 2 External Domain, no N6 IP interface


If Layer 3 External Domain; one IP address for each Edge node


If Layer 3 External Domain; one VRRP IP address for Edge Cluster

Note

  • All IP addresses are allocated by default using DHCP

  • Refer Edge Cluster creation workflow to allocate Static IP addresses

  • If using DHCP, it is highly recommended that IP addresses are reserved for all interfaces

    • Interface MAC addresses can be found in the Orchestrator for reference

Use the Celona Edge Cluster IP Network planning sheet to assist with IP design

Did this answer your question?