Firmware Version
Initial Configuration
Router Access
Router internal ip: 192.168.1.1
Use any ethernet port (P1-P4) on MUM-853
Configure static ip on PC (DHCP Server is not running on router)
Default Credentials:
username: admin
password: admin
Setup Wizard
After initial login, router will prompt for password change and launch Wizard
Configure LAN IP Address
Configure Band Settings
Configure Mobile Network Operator
Uncheck listed operator and configure Celona under Manual settings
4. Time
Click “Use PC Time” button
5. Summary Changes before applying
Cross-check settings in summary screen and click “Set Values”
6. Wizard Completion
System Configuration
Management Services
System → Configuration Screenshot
DNS
DNS Client
2. DNS Proxy
DHCP Server
Configure DHCP Option 3 and 6 (This has to be done before creating an IP Address Pool)
2. Configure IP Address Pool
NAT
Masquerading
for outbound traffic
Enabling Port Forwarding (NAPT)
for exposing services from internal network (following config assume TCP and UDP service on port 7000 needs to be exposed)
Firewall Configuration
Security → Firewall
Management Services (Predefined)
Allow Outbound traffic (by default all traffic is blocked once firewall is enabled) - IP Rules
Allow Inbound traffic to exposed services - IP Rules
Documentation
Getting Started
User Guide - Web Based Management
Application Notes - Configuring VxLAN Tunnel