Firmware Version
Initial Configuration
Dongle access
Default dongle ip: 192.168.1.1 >> click on button “Enter“ to access dongle’s web interface.
Note: Once the dongle is plugged into the laptop, there will be 1 ethernet interface auto created and will have IP: 192.168.1.x/24 with default gateway set to 192.168.1.1
System configuration
Enable Data
Navigate to Settings >> Network connection slice “Data roaming“ button to turn it on
Configure APN
Navigate to Settings >> Profile management
scroll all the way down, click “New“ button and config for celonadns in APN then click “Save“ to set the profile
then in “Profile name“ select the one just created above
then click on “Set Default“
Config Network Mode
Navigate to Settings >> Network Settings
Enable IP passthrough for Quanta
Click on Settings >> Advanced Settings >> LAN settings: in Mode click on checkbox “Passthrough“ then click apply to save the config.
note: difference version of Quanta, there is naming might difference or in Mode may have 2 or more option, look for “passthrough” as the keyword
